HYDRAULIC OILS

LUX – HVS MAXISO 32/46/68

ASHLESS MULTIGRADE HYDRAULIC FLUID
100% SYNTHETIC. PAO GROUP IV
100% SYNTHETIC “ASHLESS” Extreme Pressure Hydraulic Fluid formulated with a PAO base and zinc-free additives, particularly recommended for any hydraulic circuit subject to significant temperature variations. Ideal for sealed-for-life systems. AFNOR NF E 48603 HV, DIN 51524 Part 3 HVLP, ISO 6743 / 4 HV,
PARKER DENISON HF0, HF-1, HF-2, Eaton Vickers 1286S (Ind), M-2950-S (Mobile)
MAGIAS P68-P69-P70
Available in 1000 / 200 / 50 / 20 liters.

LUX – HVS PLISO 32/46/68

ASHLESS MULTIGRADE HYDRAULIC FLUID
100% SYNTHETIC. HC GROUP III BASE OIL
100% SYNTHETIC “ASHLESS” Extreme Pressure Hydraulic Fluid formulated with an HC base and zinc-free additives, particularly recommended for any hydraulic circuit subject to significant temperature variations. Ideal for sealed-for-life systems.
AFNOR NF E 48603 HV, DIN 51524 Part 3 HVLP, ISO 6743 / 4 HV,
PARKER DENISON HF0, HF-1, HF-2, Eaton Vickers 1286S (Ind), M-2950-S (Mobile)
MAGIAS P68-P69-P70
Available in 1000 / 200 / 50 / 20 liters.

LUX – HVI PLISO 32/46/68

MINERAL MULTIGRADE ASHLESS HYDRAULIC FLUID. GROUPEI
Extreme-pressure “ASHLESS” hydraulic fluid formulated with SELECTED MINERAL BASE OILS and zinc-free additives, particularly recommended for any hydraulic circuit subject to temperature variations.
AFNOR NF E 48603 HV, DIN 51524 Part 3 HVLP, ISO 6743 / 4 HV,
PARKER DENISON HF0, HF-1, HF-2, Eaton Vickers 1286S (Ind), M-2950-S (Mobile)
MAGIAS P68-P69-P70
Available in 1000 / 200 / 50 / 20 liters.

LUX – MI PLISO 32/46/68

SINGLE-GRADED ASHLESS MINERAL HYDRAULIC FLUID. GROUP I
Extreme-pressure “ASHLESS” hydraulic fluid formulated with SELECTED MINERAL BASE OILS and zinc-free additives, particularly recommended for any hydraulic circuit subject to temperature variations. AFNOR NF E 48603 HM, DIN 51524 Part 3 HLP, ISO 6743 / 4 HM,
PARKER DENISON HF0, HF-1, HF-2, Eaton Vickers 1286S (Ind), M-2950-S (Mobile)
MAGIAS P68-P69-P70
Available in 1000 / 200 / 50 / 20 liters.

LUX – BOVAISO 32/46/100

ASHLESS HYDRAULIC FLUID FOR VACUUM PUMPS
MINERAL. GROUP I
Provides maximum protection for high-performance industrial hydraulic pumps. Formulated with high-quality base oils and zinc-free additives that provide oxidation stability, water separation, anti-foaming, anti-wear, and anti-corrosion properties. DIN 51506-VDL, ISO 6743/3 DAB, DAJ, DGE, DVE
Available in 1000 / 200 / 50 / 20 liters.

LUX – VELFLUID EP 3/6/10cSt

ASHLESS SPINDLE LUBRICANT
100% SYNTHETIC. HC GROUP III BASED
This spindle oil is based on a selection of zinc-free components and formulated to meet the most demanding standards. Suitable for all types of spindle bearings (including textile) and can also be used in certain hydraulic systems.
DIN 51502 classification – HLP
ISO 6743/4 – Hydraulic Oils Type HM
ISO 6743/2 – Spindle Oils Type FD
Available in 1000 / 200 / 50 / 20 liters.

LUX – APRISO 22

ASHLESS HYDRAULIC FLUID FOR COMPRESSED AIR SYSTEMS
100% SYNTHETIC. HC GROUP III BASE
100% SYNTHETIC “ASHLESS” Extreme pressure hydraulic fluid formulated with an HC GROUP III base and zinc-free additives, particularly recommended for all compressed air systems.
ISO 6743/4 HH, DIN 51501L-AN
Available in 1000 / 200 / 50 / 20 liters.

HYDRO– CIRHISO 100/220/320

HIGH-QUALITY CIRCULATING OIL
MINERAL. GROUP I
High-quality circulating oil with oxidation resistance, good demulsification power, and a high viscosity index. Applications: Rolling mills, vacuum pumps, hydraulic systems requiring ISO HH fluid.
ISO 6743 / 2 FC DIN 51517 Part 3 CLP
Available in 1000 / 200 / 50 / 20 liters.

HYDRO– ASC 176 ISO 46

MULTI-GRADE HVI HYDRAULIC FLUID FOR LIFTING INDUSTRIES
MINERAL. GROUP I
Extreme-pressure hydraulic fluid formulated with SELECTED MINERAL BASE OILS and additives providing a high viscosity index. Particularly recommended for any lifting hydraulic circuit subject to significant temperature variations.
AFNOR NF E 48603 HV, ISO 6743/4 HV, DIN 51524 Part 3 HVLP
PARKER DENISON HF0, HF-1, HF-2, CASE POCLAIN P, MAGIAS P68-P69-P70
Available in 1000/200/50/20 liters.

HYDRO–V ISO 22/32/46/68/100

MULTI-GRADE HYDRAULIC FLUID, HIGH VISCOSITY INDEX
MINERAL. GROUP I
This range of high viscosity index hydraulic oils provides superior anti-wear protection and maintains its performance in extreme climatic conditions. AFNOR NF E 48603 HV, ISO 6743 / 4 HV DIN 51524 Part 3 HVLP
PARKER DENISON HF0, HF-1, HF-2 CASE POCLAIN P MAGIAS P68-P69-P70
Available in 1000 / 200 / 50 / 20 / 5 (ISO 46 & 68) liters.

HYDRO–HLP–DPISO 46/68

HYDRAULIC FLUID DETERGENT and DISPERSANT
MINERAL. GROUP I
Extreme pressure mineral hydraulic fluid, detergent and dispersant, anti-wear, category HLP-D, for the lubrication of circuits requiring a state-of-the-art emulsifiable lubricant.
PARKER DENISON HF0, HF1, HF2
ISO 6743 / 4 HM
DIN 51524 Part 3 HLP-D
Available in 1000 / 200 / 50 / 20 liters.

HYDRO– MISO 22/32/46/100

HYDRAULIC MONOGRADE EP
MINERAL. GROUP I
Premium quality anti-wear hydraulic oil, ensures maximum pump life. Provides protection against wear, oxidation, and thermal stability. AFNOR NF E 48603 HM, ISO 6743 / 4 HM DIN 51524 Part 3 HLP
PARKER DENISON HF0, HF-1, HF-2 MAGIAS P68-P69-P70
Available in 1000 / 200 / 50 / 20 5 (ISO 46 & 68) liters.

HYDRO– HFD5 ISO 46

FIRE-RESISTANT HYDRAULIC
100% SYNTHETIC. ESTER GROUP V
Our fire-resistant hydraulic fluid provides safety and protection for your equipment against fire hazards. It offers the advantages of re-extinguishing capacity and zero toxicity, material compatibility, high lubrication, and anti-wear. Operating temperature limit: 120°C.
ISO 6743/4 HFDR ISO 12922
Available in 1000 / 200 / 50 / 20 liters.

HYDRO– BIOVG6ISO 46

BIODEGRADABLE ESTER HYDRAULIC FLUID
Trimethylolpropane ester of special fatty acids
Our Biodegradable Hydraulic Fluid has high biodegradability and low toxicity to the aquatic environment, as well as high oxidation stability and low temperature performance. Long-term pumping tested. Contains antioxidants for longevity and anti-foaming. A stable product, ideal for use in environments sensitive to pollution.
VDMA 24568 class HEES ISO 15380 class HEES
Available in 1000 / 200 / 50 / 20 liters.

HYDRO – BIO STER5 ISO46

BIODEGRADABLE ESTER HYDRAULIC FLUID
based on a carboxylic ester
Our Biodegradable ESTER hydraulic fluid has high biodegradability and low toxicity
for the aquatic environment, as well as high oxidation stability, and performs well at low temperatures. Tested for long-term pumping. Contains antioxidants for longevity and anti-foaming. A stable product, ideal for use in environments sensitive to pollution.
VDMA 24568 class HEES ISO 15380 class HEES
Available in 1000 / 200 / 50 / 20 liters.

HYDRO– CMX VISO 46/68

HYDRAULIC FLUID SUITABLE FOR THE FOOD INDUSTRY
H1 category
PREMIUM hydraulic fluid with a high viscosity index, particularly stable for any hydraulic system or circuit, across a wide temperature range.
Available in 1000/200 liters.

COMPRESSOR OILS

SML MAXISO 32/46/68

HIGH-PERFORMANCE COMPRESSOR OIL
100% SYNTHETIC. GROUP IV – PAO
100% synthetic, ashless multipurpose oil for air compressors, based on pure polyalphaolene (PAO), for achieving the best performance in the lubrication of screw and reciprocating compressors in very harsh operating conditions. Also suitable for refrigeration compressors operating at very low temperatures.
DIN 51506 VC/L, VD/L, ISO 6743 / 3A DAJ
Available in 1000 / 200 / 50 / 20 liters.

SML SA ISO 100/150

Synthetic lubricant for reciprocating piston air compressors
100% SYNTHETIC. GROUP III
Developed to meet the harsh operating conditions of piston compressors operating at high pressures and high discharge temperatures. Under these conditions, it offers a reduced tendency to carbon deposits and extended oil change intervals compared to mineral oil, due to its better resistance to oxidation.
DIN 51506 VC/L, VD/L, ISO 6743 / 3A DAB/DAG/DAH
Available in 1000 / 200 / 50 / 20 liters.

SML MA ISO 100/150

RECIPARTICULATING PISTON COMPRESSOR OIL
MINERAL. GROUP I
ASHLESS air compressor lubricant based on selected mineral oils. For moderate operating conditions: 4,000-hour service life for piston reciprocating compressors. Meets the standards of most compressor manufacturers.
DIN 51506 VC/L, VD/L, ISO 6743 / 3A DAH
Available in 1000 / 200 / 50 / 20 liters.

SML SR ISO 32/46/68

FLUID FOR ROTARY, SCREW, AND VANE COMPRESSORS
100% SYNTHETIC. GROUP III
Formulated for the lubrication of rotary screw and vane compressors in severe operating conditions. Designed for severe conditions where a mineral-based product cannot ensure high end temperatures. Also allows for longer oil changes. The latest technology additives ensure exceptional resistance to oxidation and thermal degradation, far superior to mineral-based products. DIN 51506 VC/L, VD/L, ISO 6743 / 3A DAJ
Available in 1000 / 200 / 50 / 20 liters.

SML MR ISO 32/46/68

MINERAL ROTARY SCREW AND VANE COMPRESSOR OIL. GROUP I
ASHLESS air compressor lubricant based on selected mineral oils. For moderate operating conditions: 4,000-hour service life for screw compressors. Meets the standards of most compressor manufacturers.
DIN 51506 VC/L, VD/L, ISO 6743 / 3A DAH
Available in 1000 / 200 / 50 / 20 liters.

SML-RVSISO 32/46/68

FLUID FOR ROTARY SCREW COMPRESSORS AND VANE PUMPS
MINERAL. GROUP I
Ashless naphthenic oil for refrigeration compressors. This lubricant is specially formulated for the lubrication of compressors using ammonium R717, as well as hydrocarbon refrigerants such as R600a. Can be used with halogenated hydrocarbons R12 and R22. Except for refrigeration applications, it is suitable for all low-temperature applications.
DIN 51503 KAA, KC, KE
Available in 1000 / 200 / 50 / 20 liters.

SML G104 ISO 100/150

For Maximum Long-Term Protection of Screw, Reciprocating, and Vane Compressors and Vacuum Pumps
100% SYNTHETIC. GROUP V – ESTER
Premium quality, synthetic lubricant developed for centrifugal and rotary compressors. Applications: Conditions unfavorable or too severe for mineral oil. Incorporates thermally stable esters reinforced with ashless, non-detergent additives. Provides maximum protection at high pressures and temperatures that conventional petroleum lubricants cannot guarantee.
DIN 51506 VC/L, VD/L, ISO 6743 / 3A DAJ
Available in 1000 / 200 / 50 / 20 liters.

SML CMX ISO 46/68/100

FLUID FOR RECIPROCATING OR ROTARY COMPRESSORS AND VANE PUMPS.
FOOD INDUSTRY
Food-grade lubricant for refrigeration compressors. Applications: Piston or screw compressors and vane pumps in moderate operating conditions, 4,000-hour service life. Meets the standards of most compressor manufacturers.
H1 Category
Available in 1000 / 200 / 50 / 20 liters.

GEAR OIL

GRPXA LAPA ISO 100/150/220/320/460/680

ADHERENT SYNTHETIC GEAR OIL
100% SYNTHETIC GROUP III
Specially designed for industrial gear lubrication requirements. Provides maximum protection against wear and corrosion in harsh working conditions. Formulated for high temperatures.
DIN 51517 Part 3 CLP, FLENDER, HANSEN, MORGAN, DAVID BROWN, SMS, DANIELI
Available in 1000 / 200 / 50 / 20 liters.

GRPKLAISO 680

ADHERENT GEAR OIL FOR GIANT SAWS.
VERY SEVERE WORK
Formulated to meet the lubrication needs of quarry saws. Provides maximum protection against wear and corrosion in very severe working conditions.
Available in 1000 / 200 / 50 / 20 liters.

GRP ST PLUS ISO 100/150/220/320/460/680

SEMI-SYNTHETIC ADHERENT GEAR OIL
SEMI-SYNTHETIC. GROUPS I + III
Specially designed to meet industrial gear lubrication requirements. Provides maximum protection against wear and corrosion in severe working conditions.
AGMA 250.02 / 250.04 E.P., DIN 51517 Part 3 CLP, ISO 7643 L CC, ISO 3498 L-CKC
Available in 1000 / 200 / 50 / 20 liters.

GRP PSISO 100/150/220/320/460/680

ADHERENT MINERAL GEAR OIL
MINERAL GROUP I
Specially designed to meet industrial gear lubrication requirements. Provides maximum protection against wear and corrosion in harsh working conditions. AGMA 250.02 / 250.04 E.P., DIN 51517 Part 3 CLP, ISO 7643 L CC, ISO 3498 L-CKC
Available in 1000 / 200 / 50 / 20 liters

GRP ISO 100/150/220/320/460/680

MINERAL GEAR OIL
MINERAL GROUP I
Specially designed to meet industrial gear lubrication requirements. Provides maximum protection against wear and corrosion in harsh working conditions. AGMA 250.02 / 250.04 E.P., DIN 51517 Part 3 CLP, ISO 7643 L CC, ISO 3498 L-CKC
Available in 1000 / 200 / 50 / 20 liters.

GRP BIO STER5 ISO 100/150/220/320/460/680

SYNTHETIC GEAR OIL, HIGH TEMPERATURE
100% SYNTHETIC. GROUP V. STER
Specially designed to meet industrial gear lubrication requirements. Provides maximum protection against wear and corrosion in harsh working conditions. Formulated for high temperatures.
Available in 1000 / 200 / 50 / 20 liters.

KORNA ST LP W ISO 68/150/220/320/460/680K

SYNTHETIC ADHERENT LUBRICANT for SLIDEWAYS
100% SYNTHETIC GROUP III
Excellent lubricant for machine tool slideways. Formulated with selected Group III base oils and modern additives. Provides maximum protection against wear and corrosion and good adhesion to slideways under severe working conditions.
DIN 51524 HLP DIN 51517 CLP ISO / DIS 6743 – 13 Cincinnati-Milacron
Available in 1000 / 200 / 50 / 20 liters.

KORNA TS ISO 68/150/220/320/460/680

SEMI-ADHESIVE MINERAL LUBRICANT for SLIDEWAYS
MINERAL
Excellent lubricant for machine tool slideways. Formulated with mineral base oils and modern additives. Provides good protection against wear and corrosion and sufficient adhesion under harsh working conditions.
DIN 51502 CGLP68/CGLP220, ISO 3498 HG32/HG68/HG220
CNOMO HG32 / HG68 / HG220, Cincinnati-Mil. P68/P 69
Available in 1000 / 200 / 50 / 20 liters.

KORNA LP W ISO 68/150/220/320/460/680

ADHESIVE MINERAL LUBRICANT for SLIDEWAYS
MINERAL
Excellent lubricant for machine tool slideways. Formulated with mineral base oils and modern additives. Provides good protection against wear and corrosion and good performance under harsh working conditions.
DIN 51524 HLP DIN 51517 CLP ISO / DIS 6743 – 13 Cincinnati-Milacron
Available in 1000 / 200 / 50 / 20 liters.

HEAT TRANSFER OILS

CALO ISO 22/32/46/68

High-Performance Heat Transfer Fluid
MINERAL. GROUP I
Based on a selection of highly refined mineral bases, capable of providing the best performance in moderate working conditions. Maximum working temperature: 280ºC (closed circuit).
ISO 6743/12 class L family QC
Available in 1000 / 200 / 50 / 20 liters.

​CALOSYNISO 32

High-Performance Heat Transfer Fluid
100% SYNTHETIC. GROUP III
Based on a selection of highly refined synthetic bases, capable of providing the best performance in severe working conditions. Maximum working temperature: from -30ºC to 290ºC (closed circuit).
DIN 51524 Part 2 HLPM
Available in 1000 / 200 / 50 / 20 liters.

CALOSYN MAXISO 32

Premium heat transfer fluid
100% SYNTHETIC. GROUP I V – PAO
Based on a selection of highly refined synthetic bases, capable of providing the best performance under harsh working conditions. Working temperature limit: from -30ºC to 293ºC (closed circuit).
DIN 51524 Part 2 HLPM
Available in 1000 / 200 / 50 / 20 liters.

CALOSYN XXL ISO 22/46

Premium heat transfer fluid
100% SYNTHETIC. ALKYLBENZENE
Based on a selection of highly refined synthetic bases, capable of providing the best performance in harsh working conditions. Operating temperature limit: from -30ºC to 295ºC (closed circuit).
KS M 2501 ISO 6743/12 class L family QB DIN 51502 class L
Available in 1000 / 200 / 50 / 20 liters.

POWER Drain

Cleaning product for hydraulic and thermal circuits
TREATMENT DOSAGE: 100%
Available in 1000 / 200 / 50 / 20 / 5 / 1 liters.

LIMEMUL CONCENTRATE
Cleaning product for hydraulic and thermal circuits
TREATMENT DOSAGE: 5% MAINTENANCE DOSAGE: 1%
Available in 1000 / 200 / 50 / 20 / 5 / 1 liter containers.

PNEUMATIC LUBRICANTS

TWXISO 22/32/46/68/100/220/320/460

LUBRICANTS FOR PNEUMATIC TOOLS
MINERAL. GROUP I
Provides good lubrication for compressed air tools such as air hammers, impact wrenches, pneumatic riveters, drills, etc. Supply via an in-line lubricator or directly via the quick coupler. In addition to lubrication, it protects against the formation of gums and varnishes that are detrimental to the proper functioning of pneumatic tools.
DIN 51524 Part 2 HLP, ZF TE ML 12, Gardner – Denver, CETOP HM
Available in 1000 / 200 / 50 / 20 liters.

NEAT OILS – METALS

TFLNOXI TT533

STAINLESS STEEL
VERY HIGH SEVERITY SYNTHETIC
Neat, extreme pressure, “Anti-Fog” cutting oil, formulated with Group III synthetic base oils. Manufactured with a complex blend of additives to meet the needs of stainless steels in very severe machining conditions.
Available in 1000 / 200 / 50 / 20 liters.

TFLNOXITT525

STAINLESS STEEL
HIGH SEVERITY SEMI-SYNTHETIC
Neat, extreme pressure, “Anti-Fog” cutting oil, formulated with Group I and III synthetic base oils. Manufactured with a complex blend of additives to meet the needs of stainless steels in severe machining conditions.
Available in 1000 / 200 / 50 / 20 liters.

TFLNOXITT520

STAINLESS STEEL
HIGH SEVERITY MINERAL
Neat, extreme pressure, “Anti-fog” cutting oil, formulated with selected mineral base oils. Manufactured with a complex blend of additives to meet the needs of machining stainless steels in severe conditions.
Available in 1000 / 200 / 50 / 20 liters.

TFLNOXI 5150

STAINLESS STEEL
VERY HIGH SEVERITY HAND THREADING
Neat, extreme pressure, “Anti-fog” cutting oil, formulated with GROUP III SYNTHETIC AND MINERAL base oils. Manufactured with a complex blend of additives to meet the needs of threading stainless steel in very severe conditions. Available in 1000 / 200 / 50 / 20 liters.

TFLNOXIW435

STEEL, ALUMINUM & CAST IRON
VERY HIGH SEVERITY Viscosity at 40ºC 32-37 cSt
Neat, extreme-pressure, “anti-fog” cutting oil formulated with vegetable, mineral, and synthetic base oils. Manufactured with a complex blend of additives to meet the needs of machining steel, aluminum, and cast iron in very severe conditions.
Available in 1000 / 200 / 50 / 20 liters.

TFLNOXIW421

STEEL, ALUMINUM & CAST IRON
HIGH SEVERITY Viscosity at 40ºC 20-25 cSt
Neat, extreme pressure, “Anti-Mist” cutting oil, formulated with vegetable and mineral base oils. Manufactured with a complex blend of additives to meet the needs of severe machining conditions of steel, aluminum, and cast iron.
Available in 1000 / 200 / 50 / 20 liters.

TFLNOXIW412

STEEL, ALUMINUM & CAST IRON
HIGH SEVERITY Viscosity at 40ºC 10-15 cSt
Neat, extreme pressure, “Anti-Mist” cutting oil, formulated with vegetable and mineral base oils. Manufactured with a complex blend of additives to meet the needs of machining steel, aluminum, and cast iron in severe conditions.
Available in 1000 / 200 / 50 / 20 liters.

TFL

BRONZE, COPPER, BRASS & CAST IRON
MEDIUM / LOW SEVERITY Viscosity at 40°C
Neat, extreme-pressure, “Anti-fog” cutting oil, formulated with vegetable and mineral base oils. Manufactured with a complex blend of additives to meet the needs of machining bronze, copper, brass, and cast iron in medium and light conditions.
Available in 1000 / 200 / 50 / 20 liters.

TFLSKINO PLUS 415

STEEL, ALUMINUM & CAST IRON
HIGH SEVERITY MACHINE THREADING
Neat, extreme pressure, “anti-fog” cutting oil, formulated with vegetable and mineral base oils. Manufactured with a complex blend of additives to meet the needs of threading in severe conditions on steel, aluminum, and cast iron.
Available in 1000 / 200 / 50 / 20 liters.

TFLSKINO 4130

STEEL, ALUMINUM & CAST IRON
HIGH SEVERITY HAND THREADING
Neat, extreme pressure, “anti-fog” cutting oil, formulated with vegetable and mineral base oils. Manufactured with a complex blend of additives to meet the needs of threading in severe conditions on steel, aluminum, and cast iron.
Available in 1000 / 200 / 50 / 20 liters.

TFLNOXIMQL-S3

HIGH SEVERITY MICRO LUBRICATION
Neat, extreme pressure cutting oil formulated with Group III synthetic base oils. Manufactured with a complex blend of additives to meet the needs of machining with micro lubrication (external and internal) in severe working conditions.
Available in 1000 / 200 / 50 / 20 liters.

TFLNOXIMQL-VG

HIGH SEVERITY MICRO LUBRICATION
Neat, extreme pressure cutting oil formulated with VEGETABLE base oils. Manufactured with a complex blend of additives to meet the needs of machining with micro lubrication (external and internal) in severe working conditions.
Available in 1000 / 200 / 50 / 20 liters.

TFLNOXIMQL-M

HIGH SEVERITY MICRO LUBRICATION
Neat, extreme pressure cutting oil formulated with mineral base oils. Manufactured with a complex blend of additives to meet the needs of machining with micro lubrication (external and internal) in severe working conditions.
Available in 1000 / 200 / 50 / 20 liters.

TFLTOIL 30

Viscosity at 40ºC 10-12 cSt
High Severity GRINDING
Neat, extreme pressure cutting oil formulated with mineral base oils.

SYNTHETIC GROUP III. Manufactured with a complex blend of additives to meet the needs of grinding operations in harsh working conditions.
Available in 1000 / 200 / 50 / 20 liters.

TFLTOIL 26

Viscosity at 40ºC 6-7 cSt
High Severity SUPERFINISHING
Neat, extreme-pressure cutting oil formulated with SYNTHETIC GROUP III base oils. Manufactured with a complex blend of additives to meet the needs of machine superfinishing operations in harsh working conditions.
Available in 1000 / 200 / 50 / 20 liters.

TFLTOIL 23

Viscosity at 40ºC: 3-4 cSt
High Severity SUPERFINISHING
Neat, extreme-pressure cutting oil formulated with GROUP III SYNTHETIC base oils. Manufactured with a complex blend of additives to meet the needs of machine finishing operations in severe working conditions.
Available in 1000 / 200 / 50 / 20 liters.

TFLELECTRA 002

Viscosity at 40ºC: 2-3 cSt
High Severity EDM
Neat, extreme-pressure cutting oil formulated with GROUP III SYNTHETIC base oils. Manufactured with a complex blend of additives to meet the needs of EDM operations in severe working conditions.
Available in 1000 / 200 / 50 / 20 liters.

DEFORMING OILS – METALS

DEFORM XXLTT5115

STAINLESS STEEL
HIGH SEVERITY COLD DRAWING AND STAMPING
Extreme pressure lubricant, chlorine-free formula, meets the needs of the most demanding stamping, extrusion, and cold forming operations.
Available in 1000 / 200 / 50 / 20 liters.

DEFORM XXLW10E

STEEL, ALUMINUM & CAST IRON
VERY HIGH SEVERITY COLD DRAWING AND STAMPING
Formulated for cold forming operations on metals under very severe and deep working conditions in one or more passes on high-tonnage vertical presses.
Available in 1000 / 200 / 50 / 20 liters.

DEFORM XXLW495

STEEL, ALUMINUM & CAST IRON
HIGH SEVERITY COLD DRAWING AND STAMPING
Formulated for cold forming operations on high-tonnage vertical presses, in one or more passes.
Available in 1000 / 200 / 50 / 20 liters.

DEFORM LW495

STEEL & CAST IRON
HIGH SEVERITY COLD DRAWING AND STAMPING
Evaporable/vanishing fluid, transparent with very low viscosity and odorless, for cold forming of all types of metals (including copper alloys, brass, galvanized steel, and aluminum).
Available in 1000 / 200 / 50 / 20 liters.

DEFORM LW475

STEEL & CAST IRON
MEDIUM/HIGH SEVERITY COLD DRAWING AND STAMPING
Evaporable/vanishing fluid, transparent, with very low viscosity and odorless, for cold forming all types of metals (including copper alloys, brass, galvanized steel, and aluminum).
Available in 1000 / 200 / 50 / 20 liters.

DEFORM LW405

STEEL & CAST IRON
MEDIUM/HIGH SEVERITY COLD DRAWING AND STAMPING
Evaporable/vanishing fluid, transparent, with very low viscosity and odorless, for cold forming all types of metals (including copper alloys, brass, galvanized steel, and aluminum).
Available in 1000 / 200 / 50 / 20 liters.

DEFORM XXLTT5

STAINLESS STEEL
EXTREME OPERATIONS SEMI-SYNTHETIC ADDITIVE
Special additive for working with stainless steels in very harsh conditions. Latest generation, chlorine-free, highly productive and effective in difficult forging applications. Completely neutral with regard to wash-out emissions.
BENEFITS:
Increases lubricity and protects tools.
Increases lubricant and mechanism life.
Improves performance and corrosion protection.
Available in 1000 / 200 / 50 / 20 liters.

DEFORMXXL MQN

STEEL & CAST IRON
EXTREME OPERATIONS ADDITIVE
Special additive for working with stainless steels in very harsh conditions. Latest generation, chlorine-free, highly productive and effective in difficult forging applications. Completely neutral with regard to wash-out emissions.
ADVANTAGES:
Increases lubricity and protects tooling.
Extends the life of the lubricant and mechanisms.
Improves performance and corrosion protection.
Available in 1000 / 200 / 50 / 20 liters.

DEFORM XXL

STEEL & CAST IRON
EXTREME OPERATIONS ADDITIVE
Special additive for working with stainless steels in very harsh conditions. Latest generation, chlorine-free, highly productive and effective in cases of difficult forging. Completely neutral in terms of washout emissions.
Apply to the coil before introduction into the press.
ADVANTAGES:
Increases lubricity and protects tooling.
Extends the life of the lubricant and mechanisms.
Improves performance and corrosion protection.
Available in 1000 / 200 / 50 / 20 liters.

QUENCHING OILS – METALS

TRAMPEX KTL 150

HIGH SEVERITY QUENCHING OIL
Formulated with mineral base oils and oxidation stabilizing additives, as well as antioxidants, corrosion inhibitors, antifoaming agents, and cooling rate accelerators.
Available in 1000 / 200 / 50 / 20 liters.

MISCIBLE CUTTING OILS – SEWORK SLEP

SOLUBLE WHITE OIL
HIGH SEVERITY WHITE EMULSION
Soluble, extreme-pressure cutting fluid formulated with selected vegetable and mineral bases. White solution for metalworking, multiple operations, all metals.
Refractive index: 1.08 Recommended concentration: 4 to 15% pH 8.8/9.2 at 5%
Available in 1000 / 200 / 50 / 20 liters.

EWORK SXT 2015

OPALESCENT EMULSION
MEDIUM / HIGH SEVERITY SEMI-SYNTHETIC
Soluble, extreme-pressure cutting fluid formulated with Group III vegetable and synthetic bases. High-performance fluid for metalworking, machining, and grinding operations on all metals.
Refractive index: 2.08 Recommended concentration: 4 to 12% pH 9.0/9.2 at 5%
Available in 1000 / 200 / 50 / 20 liters.

EWORK STV 2015

GREEN SOLUTION
MEDIUM / LOW SEVERITY SYNTHETIC
Soluble, extreme-pressure cutting fluid formulated with selected vegetable and mineral bases. Chlorine-free fluid for metalworking, machining, and grinding operations on all metals.
Refractive index: 4.50 Recommended concentration: 5 to 10% pH 9.5/10.00 at 5%
Available in 1000 / 200 / 50 / 20 liters.

GENERAL LUBRICATION TR-XP

CHAINSAW CHAIN ​​OIL with ADHESIVE ADDITIVE
Multi-purpose, adhesive oil, specially designed for chainsaw chains. Reduces consumption compared to conventional chain oils.
Available in 1000 / 200 / 50 / 20 / 5 liters.

TR-BIO

VEGETABLE-BASED CHAINSAW CHAIN ​​OIL
Multi-purpose, adhesive vegetable oil, specially designed for chainsaw chains. Reduces consumption compared to conventional chain oils.
Available in 1000 / 200 / 50 / 20 liters.

LX-GRSAE 10/20/30/40

NON-ADDITIVE OIL FOR LOST LUBRICATION
Mineral lubricant for general lubrication of machines and tools.
Available in 1000 / 200 / 50 / 20 liters.

PX-M SAE 10/20/30/40

ADDITIVE OIL FOR LOST LUBRICATION
Mineral lubricant for general lubrication of machines and tools. Its additive improves performance and prevents corrosion.
Available in 1000 / 200 / 50 / 20 / 5 liters.

OILY

Antioxidant Protective Fluid
Oily antioxidant protective fluid formulated to protect metals from corrosion. A very thin film provides long-lasting protection that is easy to remove.
Available in 1000 / 200 / 50 / 20 liters.

FERRO-LBXEVERT

EVANESCENT
Antioxidant Protective Fluid
Evaporable antioxidant fluid, corrosion protector for metals. A very thin film provides long-lasting protection that is easy to remove.
Available in 1000 / 200 / 50 / 20 liters

.